Zolved community solution

 

Zolved community solution Createarticle_iconnew articleEditarticle_iconedit article

How do I Set and Record the DATE/TIME on my Camcorder VP-D363i

Setting and recording the date/time feature works in the CAMERA mode only.

Setting and Recording the DATE/TIME

  • Setting and recording the date/time feature works in the CAMERA mode only.
  • You can record the date/time on your tapes, so you will know when it was made. The date and time are recorded whenever they are displayed on the viewfinder or LCD.

 

Setting a DATE/TIME

  • Setting the DATE/TIME is possible in CAMERA STANDBY mode only.
  1. Make sure that you have installed the LITHIUM BATTERY. (see page 21) The LITHIUM BATTERY is needed to maintain the clock.
  2. Set the power switch to CAMERA mode. (see page 22).
  3. Press the MENU ON/OFF button, then the MENU list will appear.
  4. Turn the UP/DOWN dial until CLOCK SET is highlighted.
  5. Press ENTER.
  • CLOCK SETTING is possible when the DATE and TIME appear.
  • BLINKING indicates the possible changes for the setting.

          The year will be the first to blink.

    6.  Turn the UP/DOWN dial to set the desired year.

    7.  Press ENTER.

  • The month to be reset will blink.

    8.   Turn the UP/DOWN dial to set the desired month.

    9.   Press ENTER.

  • The day to be reset will blink.

  10.  You can set the day, hour and minute following the same procedure           used for setting the year and month.

  11.  Press ENTER after setting the minute and the clock setting screen will

          disappear. The selected date and time will then be displayed.

 

Recording the DATE/TIME

1. Make sure that you have set the DATE/TIME.

2. Set the power switch to CAMERA mode. (see page 22)

  • Open the LCD monitor and adjust it to see comfortably.

3. Press the DATE/TIME button the required number of times.

  • To record the date only, press the DATE/TIME button once.
  • To record the date and time, press the DATE/TIME button twice.

4. Press the START/STOP button to record the DATE/TIME on your recording.

 

Notes:

  • If your date and time settings are not maintained in the camcorder,

it means the installed LITHIUM BATTERY is discharged. (see page 21)

  • You cannot conceal the recorded date or time during playback.
  • The DATE/TIME function cannot be turned off in EASY or CUSTOM mode.
Source: Samsung

 

 

Comments

 

 

Type:ManagedContent
Updated at:04 Apr 00:17
Updated by:hari_guru
Tags:
Keywords:VP-D363i
Brand: Topic > How To
Topic > Setup
Article Source > Official Vendor Site
Brand > Samsung > SCD/VPD 363