Zolved community solution

 

Zolved community solution Createarticle_iconnew articleEditarticle_iconedit article

How do I install the Canon Digital Video Solution software in Windows?

Follow the procedure given in this article.

  1. Close any programs that are running.
    • Users of Windows 2000 or Windows XP Professional must first log on as an Administrator to install programs.
  2. Set the Canon Digital Video Solution Disk in the computer's CD-ROM drive.
    • The installer panel will display automatically.
    • If the installer panel does not appear automatically, use the following procedures to display it.
      1. Double-click the My Computer icon on the desktop to open it and double-click the CD-ROM icon.
      2. Double-click the Setup icon.
  3. Click Digital Video Software Installation.
  4. Confirm the target folder for the installation and click the Next button.
    • Normally, select (C:).
  5. Click the Next button.
  6. Confirm the program selection and click the Next button.
    • The installation will start.
    • Follow the onscreen messages to proceed with the installation.
  7. After the installation is complete and the installer panel displays again, click Exit button.
    • The installer panel disappears.
    • Depending on the computer you are using, the installer panel might not display again after the installation is complete.
      Restart your computer if you are prompted to.
Next, install the DVC Storage Driver. Do not remove the CD-ROM from the computer's drive.
Source: Canon

 

 

Comments

 

 

Type:ManagedContent
Updated at:03 Apr 22:48
Updated by:hari_guru
Tags:
Keywords:installation process, procedure, set up, install
Brand: Topic > How To
Topic > Tips & Tricks
Article Source > Official Vendor Site
Category > Camcorders
Brand > Canon > DC 100