How do I Use The Demonstration Mode for my Camcorder VP-D363i

• Demonstration automatically shows you the major functions that are included with your Camcorder so that you may use them more easily.
• The Demonstration function may only be used in the Camera mode without a tape inserted in the Camcorder.
• The Demonstration operates repeatedly until the Demonstration mode switched Off.

1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
3. Press the MENU button.
   The menu list will appear.
4. Move the Menu selector to the left or right to select System, then press the Menu selector.
5. Move the Menu selector to the left or right to select Demonstration, then press the Menu selector.
6. Move the Menu selector to the left or right to select On, then press the MENU button.
   The Demonstration will begin.
7. To quit the Demonstration, press the MENU button.

Note:  The Demonstration mode is automatically activated when the Camcorder is left idle for more than 10 minutes after switching to the Camera mode (and no tape is inserted in the Camcorder).

If you press other buttons (FADE, BLC, PHOTO, EASY.Q) during the Demonstration mode, the demonstration stops temporarily and resumes 10 minutes later if you do not operate any other functions.

Demonstration function may not work while the NITE PIX is turned on in some models.

rate the article 

Problem not solved? Ask a Zolved Guru...

Friend needs help? Try Zolved Remote Control...