How Do I Set The Clock On My SC-D363 Or SC-D365

1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Press the [MENU] button. The menu list will appear.
3. Move the [Zoom] lever up or down to select [System], then press the [OK] button.
4. Move the [Zoom] lever up or down to select [Clock Set], then press the [OK] button. The year will be highlighted first.
5. Move the [Zoom] lever up or down to set current Year, then press the [OK] button.  The month will be highlighted.
6. You can set the month, day, hour and minute following the same procedure after setting the year.
7. Press the [OK] button after setting the minutes. A message "Complete" is displayed.
8. To adjust the clock, select the Year, Month, Day, Hour or Min by pressing the [OK] button, then move the [Zoom] lever up or down to set respective values.
9. To exit, press the [MENU] button.

• After the Lithium Battery loses its charge (about 6 months), the date/time appears on the screen as <12:00 AM JAN.1,2006>.
• If the Lithium Battery is not installed, any inputted data will not be backed up. 

To turn the time/date stamp on:

1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [MEMORY].
3. Press the [MENU] button. The menu list will appear.
4. Move the [Zoom] lever up or down to select [Display], then press the [OK] button.
5. Move the [Zoom] lever up or down to select [Date/Time], then press the [OK] button.
6. Move the [Zoom] lever up or down to select [Off], [Date], [Time], [Date&Time], then press the [OK] button.
   
7. To exit, press the [MENU] button.

rate the article 

Problem not solved? Ask a Zolved Guru...

Friend needs help? Try Zolved Remote Control...