To set up the PlayStation 2 on the Comcast High-Speed Internet network you must first install the network adaptor according to the instructions found in the installation guide. Once you have installed the network adaptor you are ready to begin the ISP setup process.

1. Power up the PlayStation 2 and load the Network Adaptor Startup Disc.
2. Once it has loaded, Press X to enter the ISP Setup.
3. The ISP Setup will begin to load.

   

4. Once the setup process has loaded, press X to continue.

   

5. Your PlayStation will search for the network adaptor.

   

6. After the network adaptor has been found, press X to continue.

   

7. Press X again to continue.

   

8. Wait while the data is accessed.

   

9. Select New and then press X to continue.

   

10. Type a name for your ISP setting. For example, you could type Comcast High-Speed Internet, but this can be any name you would like to associate with this connection.

    

11. When asked if you currently subscribe to an ISP service, select YES and press X to continue.

    

12. For connection type, choose High-Speed Connection (Cable or DSL) and press X to continue.

    

13. Select Automatic Settings and press X to continue.

    

14. When asked if your ISP requires a User ID and Password, select No and press X to continue.

    

15. When asked if your Internet Service Provider requires you to input a DHCP Host Name, select NO and press X to continue.

    

16. Wait while your network connection is tested.

    

17. Once the network connection test is successful press X to save the configuration to the memory card.

    

18. The network configuration will now be saved to the memory card. Do not remove the network card while this information is being saved.

rate the article 

Problem not solved? Ask a Zolved Guru...

Friend needs help? Try Zolved Remote Control...