Use the set up instructions below to make sure that your Efficient Networks 5360 modem is set up properly. For more detailed instructions, please view the Quick Start Guide.

1. With your computer off, connect the Ethernet cable to the Ethernet port on the modem.
2. Connect the other end of the Ethernet cable to the Ethernet port on your computer.
3. Plug the DSL cable into the DSL port on the modem.
4. Plug the other end of the DSL cable into the phone jack, or
5. If using a two-to-one adapter, plug the cable into the open socket of your two-to-one adapter.
6. Plug the power adapter into the power outlet and modem.
7. Power on the computer. Power on the modem.

Tips:

• Test the power outlet that your DSL modem is plugged into by plugging in a lamp or other electronic device to make sure the outlet is working.
• Check your Ethernet or USB cables. They may be damaged and need to be replaced.

rate the article 

Problem not solved? Ask a Zolved Guru...

Friend needs help? Try Zolved Remote Control...