Zolved community solution
| Zolved community solution |
 new article edit article
|
How to set up your 2Wire 1070B modem for AT&T Yahoo! ISP?
Use these set up instructions to make sure that your 2Wire 1070B DSL single user modem is set up properly.
Use the set up instructions below to make sure that your 2Wire 1070B DSL single user modem is set up properly.
1. Connect the straight-through Ethernet cable to the Ethernet port on the modem .
2. Connect the other end of the straight-through Ethernet cable to the Ethernet port on your computer.
3. Plug the DSL cable into the phone line port on the modem.
4. Plug the other end of the DSL cable into the phone jack, or
5. If using a two-to-one adapter, plug the cable into the open socket of your two-to-one adapter.
6. Plug the power adapter into the power outlet and modem to power on the modem.
.jpg)
Tips:
- Test the power outlet that your DSL modem is plugged into by plugging in a lamp or other electronic device to make sure the outlet is working.
- Check your Ethernet or USB cables. They may be damaged and need to be replaced.
Source: AT&T Yahoo!
