How to set up the Xbox 360 Controller?

Connect the controller to the Xbox 360 console

To connect your Xbox 360 Controller to your console, insert the controller cord connector into either of the controller ports on the front of the console. To disconnect, pull the controller cord connector out. Make sure that you pull on the connector, not the cable.

Note Do not touch controller cord terminals with your fingers or let metal parts touch them. Doing this may damage the controller or the console.



Note Only clean the connectors by using a dry or slightly damp cloth. You may damage your controller by using cleaning solutions when you try to clean the connectors.

Turn the console on and off

To turn on your Xbox 360 console by using the controller, press Start or press the Xbox Guide button.



To turn off the console by using the controller, press and hold the Xbox Guide button for three seconds, and then confirm that you want to turn the console off.



You can also turn the console on and off by pressing the power button on the front of the console.

Connect the controller to a Windows XP-based computer

Xbox 360 Controller software for Microsoft Windows enables the Xbox 360 Controller to work with a Windows XP-based computer. To download the software, visit the Downloads section on the following Microsoft Web site:

http://www.microsoft.com/hardware/gaming/productdetails.aspx (http://www.microsoft.com/hardware/gaming/productdetails.aspx)

You must first install the software, and then connect the Xbox 360 Controller to the computer’s USB port.

Problem not solved? Ask a Zolved Guru... Friend needs help? Try Zolved Remote Control... rate the article del.icio.us   stumble print