Zolved community solution
| Zolved community solution |
 new article edit article
|
Setting up Picture Caller ID and Caller ID Ringtone on Treo 600
Treo smartphone has the amazing ability to display a picture and play a special ringtone that was assigned for the person calling you. For more details check out this article.
To setup picture Caller Id and Caller Id Ringtone on Treo 600…
Extra Credit: CDMA version only
Some older version of voicemail and IVR systems do not work with default DTMF tones in Treo 600. If your Extra Digits fail to be recognized or cannot adjust the timing accurately to get a response then turn off the Short DTMF option.
To do this follow these steps:
- First you have to take snapshot of the person using the built-in camera or transfer an image from computer.
- Then you have to setup a favorite.
- Press Phone.
- Use the 5-way to access favorite.
- Select a blank button > Press Center. If page is full, continuously press Right to scroll down to next page. There are 5 pages of favorite.
- From the Types pick list at the top of the screen > select Speed Dial.
- Enter the favorite
- For existing contact
Select Lookup > type the last name of the contact as it’s stored in your contact list > select Add.
- For a number you want to add manually.
Type a Label for the contact > Press Down and enter the number.
- For existing contact
- Enter a Quick key. In phone application, you can press and hold the quick key to immediately dial the number.
- Select More button.
- If you like to dial an extension to reach this person(like
1-650-555-6355
x 5870), Extra Digits might be helpful to you.
- If you like, check the box for Dial Extra Digits Automatically. When the call is picked upon the other end then Treo will immediately dial the extra digits. Otherwise, you can select the Extra Digits button manually when it appears on the screen (after the call has connected).
- Select the Picture Caller ID and Caller ID Ringtone in the pick list for ringtone. Select a special ringtone that will play when that person is calling you.
- Check the box for image.
- Use the box to select Image. Select one of the images you have stored on your smartphone > press Select to set it.
- Select Ok > press Ok again.
Extra Credit: CDMA version only
Some older version of voicemail and IVR systems do not work with default DTMF tones in Treo 600. If your Extra Digits fail to be recognized or cannot adjust the timing accurately to get a response then turn off the Short DTMF option.
To do this follow these steps:
- Press Phone.
- Press Menu.
- In the Menu option > select Phone Preferences.
- Uncheck the box for Enable Short DTMF Tones.
- Select OK.
|
del.icio.us
stumble
printcopyright © 2007, IPTouch, Inc.
