Zolved community solution
| Zolved community solution |
 new article edit article
|
Battery Replacement in Treo 600.
You've purchased a new Treo 600 battery and don't know how to replace it! No need to panic! Read this article for details..
Replacement of Treo 600 is not that as hard as you imagine! You can replace it while eating the pizza!
Follow these instructions as mentioned below:
Note: Before you perform these actions remove your SIM card to repair your Treo 600.
You are done!
Follow these instructions as mentioned below:
Note: Before you perform these actions remove your SIM card to repair your Treo 600.
| Step1: First, you remove the four (4) screw of the Treo 600 at the back side of the unit with the help of T5 and T6 Torx set and Case Opener Tool while installing a battery. Apart from that you need to have the SD card to sync or backup your Treo 600 bettery. |
 |
| Step 2: After removing all the 4 screw of the back cover, it is clipped on it might be little bit hard to remove but don't call He-man or Superman to remove that clip. |
 |
| Step 3: Now you will see the Treo 600 battery as shown in the fig. |
 |
| Step 4: Remember! Don't disconnect the battery cable from the motherboard. You need to pull the cable up from the socket. |
.jpg) |
| Step 5: You need to take precaution while removing the battery because there is a double sided tape which holds the battery to the motherboard. |
.jpg) |
| Step 6: Now you can install the new battery as shown in the fig. |
.jpg) |
You are done!
|
del.icio.us
stumble
printcopyright © 2007, IPTouch, Inc.
