Zolved community solution
| Zolved community solution |
 new article edit article
|
Using the Call Settings Menu on your Nokia N80 Device
To use the call settings menu on Nokia device, refer to this article.
Follow these steps to use the call settings menu:
- Go to Menu
- Select Tools
- Select Settings
- Click on Call settings
- Send my caller ID - You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network).
- Call waiting - If you have activated call waiting, the network notifies you of a new incoming call while you have a call in progress. Select Activate to request the network to deactivate call waiting, Cancel to request the network to deactivate call waiting, or Check status to check if the function is active or not.
- Reject call with SMS - Select Yes to send a text message to a caller informing why you could not answer the call.
- Message text - Write a text to be sent in a text message when you reject a call.
- Image in video call - You can deny video sending when you receive a video call. Select a still image to be displayed instead of video.
- Automatic redial - Select On, and your phone makes a maximum of ten attempts to connect the call after an unsuccessful call attempt. To stop automatic redialling, press the End key.
- Summary after call - Activate this setting if you want the phone to briefly display the approximate duration of the last call.
- Speed dialing - Select On, and the numbers assigned to the speed dialling keys (2-9) can be dialed by pressing and holding the key.
- Any key answer - Select On, and you can answer an incoming call by briefly pressing any keypad key, except the Left selection key, Right selection key, Power key, and End key.
- Line in use - This setting is shown only if the Subscriber Identity Module (SIM) card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, 2 is shown in the standby mode.
Note: To switch between the phone lines, press and hold # in the standby mode.
- Line change - To prevent line selection, select Line change > Disable if supported by
your SIM card. To change this setting, you need the Personal Identification Number 2 (PIN2) code.
|
del.icio.us
stumble
printcopyright © 2007, IPTouch, Inc.
