Zolved community solution

 

Zolved community solution Createarticle_iconnew articleEditarticle_iconedit article

Sony Ericsson: Using Update Service II.

Check out this item for Sony Ericsson Update Service II.

Listed below are the Installation Guidelines:
  1. Download the file to the desktop on your PC.
  2. Run the downloaded file by following the commands that appear.
  3. If you are using a DCU-60 USB cable, installation of the USB Flash driver will start automatically while the application is running.
  4. The Found New Hardware wizard will start. Follow the instructions to install the USB Flash driver.
  5. Restart Update Service after the installation.
  6. Restart the PC once the installation is complete.

How to use:
  1. Double-Click on the Update Service icon on the desktop.
  2. The first time Update Service is launched, the application accesses the internet to download content that is needed to able to run the service.
  3. This may take several minutes depending on the internet connection speed.
  4. The first time you start Update Service, about 2 MB will be downloaded to your PC.
Problem not solved?
Ask a Zolved Guru... 		Friend needs help?
Try Zolved Remote Control... 		rate the article
star
AddThis Social Bookmark Button Delicious del.icio.us   Stumble stumble Print_icon print
copyright © 2008, IPTouch, Inc.

 

Related articles

Articles_image

 

 

 

Comments

 

 

Type:ArticleContent
Updated at:02 Aug 00:09
Updated by:simple simon
Tags: sony ericsson
Keywords:Sony Ericsson, installation instructions ,guide, setup, DCU-60 USB cable, USB Flash driver,
Brand: Topic > Troubleshooting
Article Source > Authored in Zolved
Brand > Sony Ericsson