Zolved community solution
| Zolved community solution |
 new article edit article
|
I have a problem with Dynamic IP WAN Connection with WGT624!
This is really no problem. Follow the instructions in this article to know what you should do.
Symptom
The routable IP of say (ex:-11.111.11.111) which was assigned from the DSL provider but the IP automatically changes to (ex:- 192.168.1.64) which is a DHCP assigned from the service provider. Why is is that IP gets assigned to the Netgear router? hence there is no internet access
Solution
This is because you are using Dynamic IP WAN connection. In this type of setup, the modem refreshes this DHCP assigned address every 10 minutes. Sometimes the router would get confused with this happening every 10 minutes, and would stop working to fix this click on the links below and make the changes accordingly in the admin pages.
http://www.broadbandreports.com/speak/slideshow/15052557?c=939983&ret=L2ZvcnVtL3JlbWFyaywxNTA1MjQwOQ%3D%3D
http://www.broadbandreports.com/speak/slideshow/15052557?c=939984&ret=L2ZvcnVtL3JlbWFyaywxNTA1MjQwOQ%3D%3D
and change the LAN IP address of the router to a different IP range. Default IP range was 192.168.1.1,Subnet Mask 255.255.255.0 ,so change that to 192.168.XXX.1,and same Subnet Mask. XXX being any number from 2 to 254.
The routable IP of say (ex:-11.111.11.111) which was assigned from the DSL provider but the IP automatically changes to (ex:- 192.168.1.64) which is a DHCP assigned from the service provider. Why is is that IP gets assigned to the Netgear router? hence there is no internet access
Solution
This is because you are using Dynamic IP WAN connection. In this type of setup, the modem refreshes this DHCP assigned address every 10 minutes. Sometimes the router would get confused with this happening every 10 minutes, and would stop working to fix this click on the links below and make the changes accordingly in the admin pages.
http://www.broadbandreports.com/speak/slideshow/15052557?c=939983&ret=L2ZvcnVtL3JlbWFyaywxNTA1MjQwOQ%3D%3D
http://www.broadbandreports.com/speak/slideshow/15052557?c=939984&ret=L2ZvcnVtL3JlbWFyaywxNTA1MjQwOQ%3D%3D
and change the LAN IP address of the router to a different IP range. Default IP range was 192.168.1.1,Subnet Mask 255.255.255.0 ,so change that to 192.168.XXX.1,and same Subnet Mask. XXX being any number from 2 to 254.
|
del.icio.us
stumble
printcopyright © 2007, IPTouch, Inc.
