Zolved community solution
| Zolved community solution |
 new article edit article
|
Gamecube turns on and says no disc is found
It's possible that there is a problem with the lens. Read this article to know what is to be done if your console cannot identify the disc.
Try cleaning the lens with a soft clean cloth. The problem may repeat after some time. Please repeat the same steps.
Also, there are chances that the laser could be weakened over time. All you need to do is adjust the potentiometer a bit, to up the intensity. It's very easy and, you just need to turn a screw on the motherboard a few degrees. However with all that's involved in doing that, it is recommended having someone with some electronics know-how do it.
Also, there are chances that the laser could be weakened over time. All you need to do is adjust the potentiometer a bit, to up the intensity. It's very easy and, you just need to turn a screw on the motherboard a few degrees. However with all that's involved in doing that, it is recommended having someone with some electronics know-how do it.
|
del.icio.us
stumble
printcopyright © 2007, IPTouch, Inc.
